The exact selected offer
The selected EcoEnclose Indented Kraft roll is PRIK24-60, listed at 24 in width and nominal 360 linear feet for $42.50. Its specifications state 360 plus or minus 30 linear feet. The 60# catalog grade and textured surface identify the product; they do not give this site a measured cushioning thickness or a tested impact class.
Keep texture and performance separate
EcoEnclose describes the material as pliable and suitable for wrapping and light cushioning. We retain that supplier scope without converting it into a promise that any fragile object will arrive intact. Indentations visible in a generic image cannot establish compression behavior, abrasion resistance or equivalence to a particular plastic bubble-wrap grade.
Use the length range
A nominal-length unit cost is $42.50/360 x 100, about $11.81 per 100 ft. Using 330 ft gives about $12.88 per 100 ft; 390 ft gives about $10.90. These are arithmetic scenarios within the published length range, not measured contents of a delivered roll. Keep the selected denominator and tolerance beside the comparison.
Choose the next evidence step
Before adopting the material for a pack-out, ask about a sample and any relevant supplier evidence. Record the object, box, layering and intended role separately from the roll price. A purchasing calculator can estimate whole rolls from your chosen usage length, but it cannot supply an unperformed drop or compression test. If a required protection specification is missing, leave that decision unresolved.
A cut-count illustration
For hypothetical 10 ft continuous pieces, a 330 ft lower-bound roll yields at most 33 such pieces before any cutting allowance, while 360 ft yields 36 and 390 ft yields 39. These are mathematical counts from the stated length range. They are not measured production yields or a recommendation that 10 ft is enough to protect any item.
Keep the grade out of net mass
The 60#catalog label is not a statement that the selected roll weighs 60 lb. Its separate page weight field says 16 lb per unit, with the precise net-versus-packaging scope not established here. Neither field supplies a tested indentation depth or force response. Keep material grade, unit weight and any physical measurement separately labeled.
Watch the equipment fields
The same listing includes an 8 x 8 x 24 in dimensions field and a 10.25 in roll diameter. Those cannot be treated as one reconciled exact clearance for equipment. If using a dispenser, ask what the fields describe and obtain selected-product fit information. The textured-paper title and 24 in paper width do not settle the maximum outer diameter.
If an exact minimum matters
A production order requiring a guaranteed minimum continuous length needs the applicable seller commitment, not a midpoint assumption. Ask whether the published tolerance governs the selected unit and whether another verified option is available. This reference does not create a short-roll warranty or infer that every supplier will deliver the nominal length exactly.
Budget after suitability
Once the actual material role and length basis are established, record the chosen planning denominator alongside the 42.50-dollar offer. If you use 330 ft for a conservative quantity scenario, say so rather than presenting it as the measured roll. If you use 360 ft for a nominal cost comparison, retain the plus-or-minus 30 ft condition in the same record.
Sources & scope
Checked November 4, 2026. Manufacturer and retailer references support the specific statements. Dated displayed prices are not final checkout quotes, performance rankings or performance testing. This shopping reference does not replace the product label or supplier specifications or relevant configuration testing.
Keep reading
Kraft void fill answers a movement question, not every damage question ↗
GreenWrap expanded length is not an unexpanded-feed measurement ↗
A sample can answer a handling question without proving a protection grade ↗